Genetic analysis of geometric morphometric 3D visuals of French jumping horses.

BACKGROUND: For centuries, morphology has been the most commonly selected trait in horses. A 3D video recording enabled us to obtain the coordinates of 43 anatomical landmarks of 2089 jumping horses. Generalized Procrustes analysis provided centered and scaled coordinates that were independent of volume, i.e., centroid size. Genetic analysis of these coordinates (mixed model; 17,994 horses in the pedigree) allowed us to estimate a variance-covariance matrix. New phenotypes were then defined: the "summarized shapes". They were obtained by linear combinations of Procrustes coordinates with, as coefficients, the eigenvectors of the genetic variance-covariance matrix. These new phenotypes were used in genome-wide association analyses (GWAS) and multitrait genetic analysis that included judges' scores and competition results of the horses. RESULTS: We defined ten shapes that represented 86% of the variance, with heritabilities ranging from 0.14 to 0.42. Only one of the shapes was found to be genetically correlated with competition success (rg = - 0.12, standard error = 0.07). Positive and negative genetic correlations between judges' scores and shapes were found. This means that the breeding objective defined by judges involves improvement of anatomical parts of the body that are negatively correlated with each other. Known single nucleotide polymorphisms (SNPs) on chromosomes 1 and 3 for height at withers were significant for centroid size but not for any of the shapes. As these SNPs were not associated with the shape that distinguished rectangular horses from square horses (with height at withers greater than body length), we hypothesize that these SNPs play a role in the overall development of horses, i.e. in height, width, and length but not in height at withers when standardized to unit centroid size. Several other SNPs were found significant for other shapes. CONCLUSIONS: The main application of 3D morphometric analysis is the ability to define the estimated breeding value (EBV) of a sire based on the shape of its potential progeny, which is easier for breeders to visualize in a single synthetic image than a full description based on linear profiling. However, the acceptance of these new phenotypes by breeders and the complex nature of summarized shapes may be challenging. Due to the low genetic correlations of the summarized shapes with jumping performance, the methodology did not allow indirect performance selection criteria to be defined.

Randomized controlled trial demonstrates the benefit of RGTA® based matrix therapy to treat tendinopathies in racing horses.

A randomized controlled trial was performed on racing horses, to evaluate the efficacy of a new class of therapeutic agents in regenerative medicine-ReGeneraTing Agents® (RGTA®), to treat tendinopathies. Preliminary uncontrolled studies on tendon healing in racing horses with RGTA® (OTR4131)-Equitend® showed encouraging results, justifying performing a randomized, controlled, multicenter study with a two-year racing performance follow up. The objective of this study was to evaluate the effect of Equitend® versus placebo on acute superficial digital flexor tendonitis in racing French Standardbred Trotters (ST). Twenty-two ST were randomly and blindly assigned to receive with a ratio of 2 to 1, a single Equitend® (n = 14) or placebo (n = 8) intralesional injection under ultrasonographic guidance. Horses were evaluated over 4 months, by clinical and ultrasonographic evaluations (day 0, months 1, 2, 4), and their racing performances followed up over the 2 years after treatment. During the first month of treatment, a significant decrease in the cross-sectional area (CSA) was found in the Equitend® group (p = 0.04). After 4 months, the number of Equitend® treated horses with an improved CSA was significantly higher than the placebo-treated horses (p = 0.03571). The Equitend® group returned to their pre-injury performance level, racing in, and winning, significantly more races than the placebo group (p = 0.01399 and 0.0421, respectively). Furthermore, recurrence was significantly higher in the placebo group than in the Equitend® group (71.4% vs 16.6%, p = 0.02442). In conclusion, we measured a significant, short-term, reduction effect on CSA and demonstrated a long-term beneficial effect of intralesional injection of Equitend® for the treatment of superficial digital flexor tendonitis on racing ST, racing 2. 3 times more often than placebo, with 3.3 times fewer recurrences maintaining pre-injury performance level. This study may open the way for the development of a human treatment of tendonitis.

Effect of track surface firmness on the development of musculoskeletal injuries in French Trotters during four months of harness race training.

OBJECTIVE To evaluate the effect of track surface firmness on the development of musculoskeletal injuries in French Trotters during 4 months of race training. ANIMALS 12 healthy 3-year-old French Trotters. PROCEDURES Horses were paired on the basis of sex and body mass. Horses within each pair were randomly assigned to either a hard-track or soft-track group. The counterclockwise training protocol was the same for both groups. Surface firmness of each track was monitored throughout the training period. Radiography, ultrasonography, MRI, and scintigraphy were performed on all 4 limbs of each horse before and after 2 and 4 months of training. Lesions were described, and lesion severity was classified with a 5-point system, where 0 = no lesions and 4 = severe lesion. RESULTS 86 lesions were identified, of which 46 (53.5%) were classified as potentially clinically relevant (grade, ≥ 2). Of the 18 moderate and severe lesions, 15 were identified in horses of the hard-track group, and 10 of those were in forelimbs. Moderate to severe tendinopathy of the superficial digital flexor tendon of the forelimb developed in 3 of the 6 horses of the hard-track group but none of the horses of the soft-track group. Metatarsal condyle injuries were more frequent in horses of the hard-track group than horses of the soft-track group. Severe lesions were identified only in left limbs. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that track surface firmness is a risk factor for musculoskeletal injuries in horses trained for harness racing.

Achilles Tendon Load is Progressively Increased with Reductions in Walking Speed.

INTRODUCTION: Achilles tendon rehabilitation protocols commonly recommend a gradual increase in walking speed to progressively intensify tendon loading. This study used transmission-mode ultrasound to evaluate the influence of walking speed on loading of the human Achilles tendon in vivo. METHODS: Axial transmission speed of ultrasound was measured in the right Achilles tendon of 33 adults (mean ± SD: age, 29 ± 3 yr; height, 1.725 ± 0.069 m; weight, 71.4 ± 19.9 kg) during unshod, steady-state treadmill walking at three speeds (slow, 0.85 ± 0.12 ms; preferred, 1.10 ± 0.13 m·s; fast, 1.35 ± 0.20 m·s). Ankle kinematics, spatiotemporal gait parameters and vertical ground reaction force were simultaneously recorded. Statistical comparisons were made using repeated-measures ANOVA models. RESULTS: Increasing walking speed was associated with higher cadence, longer step length, shorter stance duration, greater ankle plantarflexion, higher vertical ground reaction force peaks, and a greater loading rate (P < 0.05). Maximum (F1,38 = 7.38, P < 0.05) and minimum (F1,46 = 8.95, P < 0.05) ultrasound transmission velocities in the Achilles tendon were significantly lower (16-23 m·s) during the stance but not swing phase of gait, with each increase in walking speed. CONCLUSIONS: Despite higher vertical ground reaction forces and greater ankle plantarflexion, increasing walking speed resulted in a reduction in the axial transmission velocity of ultrasound in the Achilles tendon; indicating a speed-dependent reduction in tensile load within the triceps surae muscle-tendon unit during walking. These findings question the rationale for current progressive loading protocols involving the Achilles tendon, in which reduced walking speeds are advocated early in the course of treatment to lower Achilles tendon loads.

Discrimination of two equine racing surfaces based on forelimb dynamic and hoof kinematic variables at the canter.

The type and condition of sport surfaces affect performance and can also be a risk factor for injury. Combining the use a 3-dimensional dynamometric horseshoe (DHS), an accelerometer and high-speed cameras, variables reflecting hoof-ground interaction and maximal limb loading can be measured. The aim of the present study was to compare the effects of two racing surfaces, turf and all-weather waxed (AWW), on the forelimbs of five horses at the canter. Vertical hoof velocity before impact was higher on AWW. Maximal deceleration at impact (vertical impact shock) was not significantly different between the two surfaces, whereas the corresponding vertical force peak at impact measured by the DHS was higher on turf. Low frequency (0-200 Hz) vibration energy was also higher on turf; however high frequency (>400 Hz) vibration energy tended to be higher on AWW. The maximal longitudinal force during braking and the maximal vertical force at mid-stance were lower on AWW and their times of occurrence were delayed. AWW was also characterised by larger slip distances and sink distances, both during braking and at maximal sink. On a given surface, no systematic association was found between maximal vertical force at mid-stance and either sink distance or vertical impact shock. This study confirms the damping properties of AWW, which appear to be more efficient for low frequency events. Given the biomechanical changes induced by equestrian surfaces, combining dynamic and kinematic approaches is strongly recommended for a reliable assessment of hoof-ground interaction and maximal limb loading.

Effects of management practices as risk factors for juvenile osteochondral conditions in 259 French yearlings.

Several studies have demonstrated a statistical association between management practices and juvenile osteochondral conditions (JOCC) in foals from birth to 6months of age, but this association has not been investigated in yearlings. The purpose of the current study was to determine the adjusted effects of management practices on the onset and evolution of JOCC in French yearlings. The study sample consisted of 259 yearlings born on 20 stud farms in Normandy. The breeding conditions of these horses were monitored from 6 to 17months. They were radiographed at 6 and 17months to determine their radiographic score (RS) and its evolution. Potential risk factors were investigated using univariate and multivariate analyses. The prevalence of JOCC was 48% at 6months and 42% at 17months. Between 6 and 17months, the RS changed (for better or worse) in 52% of yearlings. The main risk factors leading to deterioration in the RS were traumatic. 'Mixed housing' during winter, pastures with rough ground and a bad RS at 6months were significantly associated with deterioration in RS between 6 and 17months. In the multivariate analysis, the breed was not significantly associated with any evolution in the yearlings' RS. This study provides some indications on protective measures to prevent the worsening of JOCC lesions between 6 and 17months, a crucial period since it precedes the sale of yearlings and the beginning of training.

Equine hoof slip distance during trot at training speed: comparison between kinematic and accelerometric measurement techniques.

Longitudinal sliding of horse's hooves at the beginning of stance can affect both performance and orthopaedic health. The objective of this study was to compare two measurement methods for quantifying hoof slip distances at training trot. The right front hoof of four French Trotters was equipped with an accelerometer (10 kHz) and kinematic markers. A firm wet sand track was equipped with a 50 m calibration corridor. A high-frequency camera (600 Hz) was mounted in a vehicle following each horse trotting at about 7 m/s. One of the horses was also trotted on raw dirt and harrowed dirt tracks. Longitudinal slip distance was calculated both from kinematic data, applying 2D direct linear transformation (2D-DLT) to the markers image coordinates, and from the double integration of the accelerometer signal. For each stride, both values were compared. The angle of the hoof with respect to the track was also measured. There was 'middling/satisfactory' agreement between accelerometric and 2D-DLT measurements for total slip and 'fairly good' agreement for hoof-flat slip. The influence of hoof rotation on total slip distance represented <6% of accelerometric measures. The differences between accelerometric and kinematic measures (from -0.5 cm to 2.1cm for total slip and from -0.2 cm to 1.4 cm for hoof-flat slip) were independent of slip distance magnitude. The accelerometric method was a simple method to measure hoof slip distances at a moderate training speed trot which may be useful to compare slip distances on various track surfaces.

A method to minimise error in 2D-DLT reconstruction of non-planar markers filmed with a moving camera.

This article describes a method that allows estimating, with the 2D version of the direct linear transformation (DLT), the actual 2D coordinates of a point when the latter is not strictly in the calibration plane. Markers placed in vertical line, above, below and in the centre of a horizontal calibration plane were filmed by a moving camera. Without correction, strong errors (up to 64.5%) were noticed for markers out of the calibration plane. After correction, calculated coordinates were consistent with actual values (error < 0.55%). The method was then applied to slip distance measurement, using a marker fixed on the hoof of a horse trotting on a calibrated track while being followed with a camera. The correction effect represented 6.6% of slip distance. Combined with the 2D-DLT transformation, the proposed corrective method allows an accurate measurement of slip distances, for high-speed outdoor locomotion analysis, using a moving camera.

Kinetics of the forelimb in horses circling on different ground surfaces at the trot.

Circling increases the expression of distal forelimb lameness in the horse, depending on rein, diameter and surface properties of the circle. However, there is limited information about the kinetics of horses trotting on circles. The aim of this study was to quantify ground reaction force (GRF) and moments in the inside and outside forelimb of horses trotting on circles and to compare the results obtained on different ground surfaces. The right front hoof of six horses was equipped with a dynamometric horseshoe, allowing the measurement of 3-dimensional GRF, moments and trajectory of the centre of pressure. The horses were lunged at slow trot (3 m/s) on right and left 4 m radius circles on asphalt and on a fibre sand surface. During circling, the inside forelimb produced a smaller peak vertical force and the stance phase was longer in comparison with the outside forelimb. Both right and left circling produced a substantial transversal force directed outwards. On a soft surface (sand fibre), the peak transversal force and moments around the longitudinal and vertical axes of the hoof were significantly decreased in comparison with a hard surface (asphalt). Sinking of the lateral or medial part of the hoof in a more compliant surface enables reallocation of part of the transversal force into a proximo-distal force, aligned with the limb axis, thus limiting extrasagittal stress on the joints.

Axial speed of sound is related to tendon's nonlinear elasticity.

Axial speed of sound (SOS) measurements have been successfully applied to noninvasively evaluate tendon load, while preliminary studies showed that this technique also has a potential clinical interest in the follow up of tendon injuries. The ultrasound propagation theory predicts that the SOS is determined by the effective stiffness, mass density and Poisson's ratio of the propagating medium. Tendon stiffness characterizes the tissue's mechanical quality, but it is often measured in quasi-static condition and for entire tendon segments, so it might not be the same as the effective stiffness which determines the SOS. The objectives of the present study were to investigate the relationship between axial SOS and tendon's nonlinear elasticity, measured in standard laboratory conditions, and to evaluate if tendon's mass density and cross-sectional area (CSA) affect the SOS level. Axial SOS was measured during in vitro cycling of 9 equine superficial digital tendons. Each tendon's stiffness was characterized with a tangent modulus (the continuous derivative of the true stress/true strain curve) and an elastic modulus (the slope of this curve's linear region). Tendon's SOS was found to linearly vary with the square root of the tangent modulus during loading; tendon's SOS level was found correlated to the elastic modulus's square root and inversely correlated to the tendon's CSA, but it was not affected by tendon's mass density. These results confirm that tendon's tangent and elastic moduli, measured in laboratory conditions, are related to axial SOS and they represent one of its primary determinants.

First application of axial speed of sound to follow up injured equine tendons.

Ultrasonography is an established technique to follow up injured tendons, although the lesions' echogenicity tends to become normal before the tendon is ready to sustain the stresses imposed by exercise. Normalized axial speed of sound (SOS) has been found to correlate with an injured tendon's stiffness; therefore, the purpose of this study was to establish whether SOS would be a useful tool in tendon injury follow-up. Axial SOS was measured in 11 equine superficial digital flexor tendons during a 15-week follow-up period and compared with an ultrasonographic grading system. SOS significantly decreased 2 weeks after the surgical induction of a core lesion, showing a minimum between 7 and 10 weeks; ultrasonographic grade showed a minimum at 3 weeks and increased thereafter. The ultrasonographic grading at 15 weeks was correlated to normalized SOS. These results suggest that axial SOS provides complementary information to ultrasonography that could be of clinical interest.

Axial speed of sound for the monitoring of injured equine tendons: a preliminary study.

Equine superficial digital flexor tendons (SDFT) are often injured, and they represent an excellent model for human sport tendinopathies. While lesions can be precisely diagnosed by clinical evaluation and ultrasonography, a prognosis is often difficult to establish; the knowledge of the injured tendon's mechanical properties would help in anticipating the outcome. The objectives of the present study were to compare the axial speed of sound (SOS) measured in vivo in normal and injured tendons and to investigate their relationship with the tendons' mechanical parameters, in order to assess the potential of quantitative axial ultrasound to monitor the healing of the injured tendons. SOS was measured in vivo in the right fore SDFTs of 12 horses during walk, before and 3.5 months after the surgical induction of a bilateral core lesion. The 12 horses were then euthanized, their SDFTs isolated and tested in tension to measure their elastic modulus and maximal load (and corresponding stress). SOS significantly decreased from 2179.4 ± 31.4 m/s in normal tendons to 2065.8 ± 67.1 m/s 3.5 months after the surgical induction, and the tendons' elastic modulus (0.90 ± 0.17 GPa) was found lower than what has been reported in normal tendons. While SOS was not correlated to tendon maximal load and corresponding stress, the SOS normalized on its value in normal tendons was correlated to the tendons' elastic modulus. These preliminary results confirm the potential of axial SOS in helping the functional assessment of injured tendon.

The non-linear response of a muscle in transverse compression: assessment of geometry influence using a finite element model.

Most recent finite element models that represent muscles are generic or subject-specific models that use complex, constitutive laws. Identification of the parameters of such complex, constitutive laws could be an important limit for subject-specific approaches. The aim of this study was to assess the possibility of modelling muscle behaviour in compression with a parametric model and a simple, constitutive law. A quasi-static compression test was performed on the muscles of dogs. A parametric finite element model was designed using a linear, elastic, constitutive law. A multi-variate analysis was performed to assess the effects of geometry on muscle response. An inverse method was used to define Young's modulus. The non-linear response of the muscles was obtained using a subject-specific geometry and a linear elastic law. Thus, a simple muscle model can be used to have a bio-faithful, biomechanical response.

True stress and Poisson's ratio of tendons during loading.

Excessive axial tension is very likely involved in the aetiology of tendon lesions, and the most appropriate indicator of tendon stress state is the true stress, the ratio of instantaneous load to instantaneous cross-sectional area (CSA). Difficulties to measure tendon CSA during tension often led to approximate true stress by assuming that CSA is constant during loading (i.e. by the engineering stress) or that tendon is incompressible, implying a Poisson's ratio of 0.5, although these hypotheses have never been tested. The objective of this study was to measure tendon CSA variation during quasi-static tensile loading, in order to assess the true stress to which the tendon is subjected and its Poisson's ratio. Eight equine superficial digital flexor tendons (SDFT, about 30cm long) were tested in tension until failure while the CSA of each tendon was measured in its metacarpal part by means of a linear laser scanner. Axial elongation and load were synchronously recorded during the test. CSA was found to linearly decrease with strain, with a mean decrease at failure of -10.7±2.8% (mean±standard deviation). True stress at failure was 7.1-13.6% higher than engineering stress, while stress estimation under the hypothesis of incompressibility differed from true stress of -6.6 to 2.3%. Average Poisson's ratio was 0.55±0.12 and did not significantly vary with load. From these results on equine SDFT it was demonstrated that tendon in axial quasi-static tension can be considered, at first approximation, as an incompressible material.

Tissue characterization of equine tendons with clinical B-scan images using a shock filter thinning algorithm.

The fiber bundle density (FBD) calculated from ultrasound B-scan images of the equine superficial digital flexor tendon (SDFT) can serve as an objective measurement to characterize the three metacarpal sites of normal SDFTs, and also to discriminate a healthy SDFT from an injured one. In this paper, we propose a shock filter algorithm for the thinning of hyper-echoic structures observed in B-scan images of the SDFT. This algorithm is further enhanced by applying closing morphological operations on filtered images to facilitate extraction and quantification of fiber bundle fascicles. The mean FBD values were calculated from a clinical B-scan image dataset of eight normal and five injured SDFTs. The FBD values measured at three different tendon sites in normal cases show a highest density on the proximal site (five cases out of eight) and a lowest value on the distal part (seven cases out of eight). The mean FBD values measured on the entire tendon from the whole B-scan image dataset show a significant difference between normal and injured SDFTs: 51 (±9) for the normal SDFTs and 39 (±7) for the injured ones (p = 0.004) . This difference likely indicates disruption of some fiber fascicle bundles where lesions occurred. To conclude, the potential of this imaging technique is shown to be efficient for anatomical structural SDFT characterizations, and opens the way to clinically identifying the integrity of SDFTs.

A linear laser scanner to measure cross-sectional shape and area of biological specimens during mechanical testing.

Measure of the cross-sectional area (CSA) of biological specimens is a primary concern for many biomechanical tests. Different procedures are presented in literature but besides the fact that noncontact techniques are required during mechanical testing, most of these procedures lack accuracy or speed. Moreover, they often require a precise positioning of the specimen, which is not always feasible, and do not enable the measure of the same section during tension. The objective of this study was to design a noncontact, fast, and accurate device capable of acquiring CSA of specimens mounted on a testing machine. A system based on the horizontal linear displacement of two charge-coupled device reflectance laser devices next to the specimen, one for each side, was chosen. The whole measuring block is mounted on a vertical linear guide to allow following the measured zone during sample tension (or compression). The device was validated by measuring the CSA of metallic rods machined with geometrical shapes (circular, hexagonal, semicircular, and triangular) as well as an equine superficial digital flexor tendon (SDFT) in static condition. We also performed measurements during mechanical testing of three SDFTs, obtaining the CSA variations until tendon rupture. The system was revealed to be very fast with acquisition times in the order of 0.1 s and interacquisition time of about 1.5 s. Measurements of the geometrical shapes yielded mean errors lower than 1.4% (n=20 for each shape) while the tendon CSA at rest was 90.29 ± 1.69 mm(2) (n=20). As for the tendons that underwent tension, a mean of 60 measures were performed for each test, which lasted about 2 min until rupture (at 20 mm/min), finding CSA variations linear with stress (R(2)>0.85). The proposed device was revealed to be accurate and repeatable. It is easy to assemble and operate and capable of moving to follow a defined zone on the specimen during testing. The system does not need precise centering of the sample and can perform noncontact measures during mechanical testing; therefore, it can be used to measure variations of the specimen CSA during a tension (or compression) test in order to determine, for instance, the true stress and transverse deformations.

Ultrasound B-scan image simulation, segmentation, and analysis of the equine tendon.

PURPOSE: The hypothesis is that an imaging technique based on decompression and segmentation of B-scan images with morphological operators can provide a measurement of the integrity of equine tendons. METHODS: Two complementary approaches were used: (i) Simulation of B-scan images to better understand the relationship between image properties and their underlying biological structural contents and (ii) extraction and quantification from B-scan images of tendon structures identified in step (i) to diagnose the status of the superficial digital flexor tendon (SDFT) by using the proposed imaging technique. RESULTS: The simulation results revealed that the interfascicular spaces surrounding fiber fascicle bundles were the source of ultrasound reflection and scattering. By extracting these fascicle bundles with the proposed imaging technique, quantitative results from clinical B-scan images of eight normal and five injured SDFTs revealed significant differences in fiber bundle number and areas: mean values were 50 (+/- 11) and 1.33(+/- 0.36) mm2 for the normal SDFT data set. Different values were observed for injured SDFTs where the intact mean fiber bundle number decreased to 40 (+/- 7) (p = 0.016); inversely, mean fiber bundle areas increased to 1.83 (+/- 0.25) mm2 (p = 0.008), which indicate disruption of the thinnest interfascicular spaces and of their corresponding fiber fascicle bundles where lesions occurred. CONCLUSIONS: To conclude, this technique may provide a tool for the rapid assessment and characterization of tendon structures to enable clinical identification of the integrity of the SDFT.

Reproducibility of a non-invasive ultrasonic technique of tendon force measurement, determined in vitro in equine superficial digital flexor tendons.

A non-invasive ultrasonic (US) technique of tendon force measurement has been recently developed. It is based on the relationship demonstrated between the speed of sound (SOS) in a tendon and the traction force applied to it. The objectives of the present study were to evaluate the variability of this non-linear relationship among 7 equine superficial digital flexor (SDF) tendons, and the reproducibility of SOS measurements in these tendons over successive loading cycles and tests. Seven SDF tendons were equipped with an US probe (1MHz), secured in contact with the skin overlying the tendon metacarpal part. The tendons were submitted to a traction test consisting in 5 cycles of loading/unloading between 50 and 4050N. Four tendons out of the 7 were submitted to 5 additional cycles up to 5550N. The SOS-tendon force relationships appeared similar in shape, although large differences in SOS levels were observed among the tendons. Reproducibility between cycles was evaluated from the root mean square of the standard deviations (RMS-SD) of SOS values observed every 100N, and of force values every 2m/s. Reproducibility of SOS measurements revealed high between successive cycles: above 500N the RMS-SD was less than 2% of the corresponding traction force. Reproducibility between tests was lower, partly due to the experimental set-up; above 500N the difference between the two tests stayed nevertheless below 15% of the corresponding mean traction force. The reproducibility of the US technique here demonstrated in vitro has now to be confirmed in vivo.

Design and validation of a dynamometric horseshoe for the measurement of three-dimensional ground reaction force on a moving horse.

Properties of ground surfaces condition locomotion, and quality of track surfaces is believed to be involved in the pathogenesis of many musculoskeletal injuries in the horse. Measuring ground reaction forces (GRF) is an interesting approach to assess those interactions. Forceplates are the most commonly used but they are not well suited to compare different ground surfaces at fast gaits. Embarked equipment, fixed under the horse's hoof, would allow force measurement on any track. The objective of this work was (1) to design a device which enables the measurement of 3-D GRF on any ground, at any gait, for a given subject, (2) to determine its accuracy, and (3) to evaluate its performance and usefulness under physiological conditions. The resulting dynamometric horseshoe was composed of 4 piezoelectric sensors sandwiched between 2 aluminium plates designed at the shape of an equine shoe. The measurements, evaluated after a quasi-static calibration, revealed that the root mean square error was 1.3% in the normal direction, and 3.1% in the transversal direction. In vivo tests at the walk and trot in straight line and at the trot on circles, were conducted on 3 different ground surfaces. The results demonstrate that this dynamometric horseshoe is well suited to study the effects of different ground surfaces on GRF in the moving horse.

Effect of toe and heel elevation on calculated tendon strains in the horse and the influence of the proximal interphalangeal joint.

The sagittal alteration of hoof balance is a common intervention in horses, with corrective shoeing being one of the most frequently applied methods of managing tendonitis. However, the effect of toe or heel elevation on tendon strains is poorly understood. This study aimed to examine the effect of toe and heel wedges on the superficial digital flexor tendon, deep digital flexor tendon, and the third interosseous muscle or suspensory ligament strains using in vivo data and an accurate subject-specific model. Kinematic data were recorded using invasive markers at the walk and trot. Computerized tomography was then used to create a subject-specific model of an equine distal forelimb and strains were calculated for the superficial digital flexor tendon, the deep digital flexor tendon accessory ligament and the suspensory ligament for seven trials each of normal shoes, and toe and heel elevation. As the proximal interphalangeal joint is often ignored in strain calculations, its influence on the strain calculations was also tested. The deep ligament showed the same results for walk and trot with the heel wedge decreasing peak strain and the toe wedge increasing it. The opposite results were seen in the suspensory ligament and the superficial digital flexor tendon with the heel wedge increasing peak strain and the toe wedge decreasing it. The proximal interphalangeal joint was shown to be influential on the strains calculated with normal shoes and the calculated effect of the wedges. Our results imply that corrective shoeing appears to decrease strain in the tendon being targeted; the possibility of increases in strain in other structures should also be considered.